A ready-to-use water-based impregnation oil for indoors that hardly discolours the wood. After 2 treatments leave an almost untreated effect! Gives the surface optimal protection against water, grease and oil.

 

The new Natural Wood Sealer provides:

✓ Higher protection;
✓ An even more natural look;
✓ Easy and quick to apply.
✓ Suitable for all untreated woods!

Natural woodsealer is therefore not a maintenance product, but purely and only a finishing product for untreated wood!

Natural woodsealer is a non-yellowing polyurethane oil that is suitable for the natural finishing / protection of all untreated types of wood (including teak, oak, etc.). To be used on o, a. furniture, parquet and floorboards. Due to the high wear resistance and the good water-repellent / impregnating properties, it is extremely suitable for (salon) tables and parquet.

Consumption (guideline): ± 10 m2 / per liter. Shelf life: 2 years, if stored in a tightly closed container in a cool and dry place (frost-free).

Processing advice

Never use Natural Woodsealer on wet surfaces !!
Sand the wood well before use and make it very dust- and grease-free with, for example, Woodclean van Oranje BV.

Preferably process the oil in spaces of about 15 - 20 degrees Celsius. Apply the oil layer undiluted with a brush or roller and remove the excess applied with a cloth. After drying (approx. 3 hours, but this partly depends on the ambient temperature, humidity and amount applied), it appears that the first layer has roughened the wood slightly, then sand the first layer (after drying for approx. 3 hours) with fine sandpaper (P240 to P360). Then apply the second layer according to the aforementioned method.

Tip !: Always provide new wood with at least 2 layers of oil, the more layers of Natural Woodsealer are applied, the more intensive the gloss level of the surface, but the better the level of protection!

Aftertreatment / maintenance advice:
Use Mat Polish as a maintenance product (2 to 3 per year).